Slurry / Manure Pump

Slurry / Manure Pump

ER2-type centrifugal slurry / manure pump with air-cooled electric motor for stationary use as a chopper pump with mixing facility in pits and other storages.

The pump is equipped with a special valve plate to switch between the two possible operations of pumping or mixing. The agitation nozzle is pivotable 270° horizontally and vertically by 60°. Using the agitation nozzle it is possible to homogenise the slurry before pumping by stirring up floating or sinking layers.

The robust Euro-P-type impeller transforms the power of the drive into a high flow rate. The special design of the steel made impeller consists of an intake screw with hardened cutting edges to shred straw and fibres. The hefty cast-iron volute sustains even the most wearing applications and is one of the reasons for the high durability.

Basic length for pit depths up to 1.65m; all further extensions in steps of 25cm to the basic length. Special sizes are manufactured on request.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Typical Fields of Application

  • manure agitation 
  • homogenisation of manure before pumping 
  • transfer to storage tank 
  • flushing applications 
  • filling of slurry tankers

 

 

 

 

 

 

 

 

 

 

Technical Specification

motor nominal power choice out of 5 different AC motors with 7.5kW; 11KW; 15kW; 18.5kW and 22kW
protection class IP55
rated speed 1450 rpm
operating voltage 400V 3~, 50Hz
pressure line 133mm
quick coupling outlet side female Perrot (other quick couplings on request)
basic length 1.25m, all further extensions in steps of 25cm to the basic length
sealing carbon silicide mechanical seal
oil qty 2,5ltr. je Meter Mantelrohr
lubrication oil HLP 46

Materials

volute cast iron
valve plug cast iron, optional brass
coupling housing cast iron
impeller and intake ring steel, matching drive power, with tungsten carbide edges
bolts stainless steel
other metal parts galvanized, stainless on request

About the author

schaapagro administrator